Firmware Update 49 - Gigaset N300 IP, 300A IP, N510 IP PRO Gigaset N300 IP, 300A IP, N510 IP PRO - Firmware update 2 (version 49, September 2011) New features: ------------- • E-mail: Up to 6 e-mail accounts can be assigned to up to 6 different handsets and can be accessed in parallel • MWI notification: • Enable/disable MWI light notification for each handset individually • Set up the light notification for different message types (missed calls/alarms, e-mail, SMS, answering machine, network mailbox) • TLS, POP3S, HTTPS supported • Country specific call progress tones: additional countries supported • Link specific netdirectory private page for each VoIP account • Autoprovisioning: • Write protect selected settings in Web Configurator • PBX / provisioning server can initiate autoprovisioning • Gigaset T300 PRO / T500 PRO PBX support: Reinitiate autoprovisioning after each registration of a new handset • Web Configurator: • Addition of a "5 minute installation wizard" to quickly guide you through - not all - but the very important installation steps only • Support of 3 new languages - Polish, Greek, Portuguese • Select mode ‘automatic’ or ‘manual’ for firmware and profile update separately • Possibility to reboot the base station Compatibility: -------------- • Support of additional Gigaset handsets: A510H and C300H • Gigaset T300 PRO / T500 PRO • Asterisk 1.6 • Broadsoft V.17 with CTI support: Click to dial, Click to answer. Remarks: -------- • If an A510H handset has already been registered to your Gigaset IP system, please register your A510H handset again after running this SW update to get a full compatibility of features. • The Online Help included in the Web Configurator, to guide you and support you though the installation, will be available first in English and from November 2011 in all the languages we support. ------------------------------------------------------------ DEUTSCHE VERSION ------------------------------------------------------------ Firmware Update 49 - Gigaset N300 IP, 300A IP, N510 IP PRO Gigaset N300 IP, 300A IP, N510 IP PRO - Firmware update 2 (version 49, September 2011) ======================================================================================= Neue Features: -------------- • Mail: Bis zu 6 E-Mail-Accounts können bis zu 6 verschiedenen Mobilteilen zugeordnet und parallel genutzt werden • MWI-Anzeige: • Schalten Sie die blinkende MWI-Anzeige für jedes Mobilteil separat ein oder aus • MWI-Anzeige: Stellen Sie die MWI-Anzeige für verschiedene Nachrichtenarten ein (Versäumte Anrufe/Alarme, E-Mails, SMS, lokaler Anrufbeantworter, Netz-Anrufbeantworter) • TLS, POP3S, HTTPS werden unterstützt • Länderspezifische Ruftöne: weitere Länder wurden hinzugefügt • Anbindung eines benutzerspezifischen Onlinetelefonbuchs für jeden VoIP Account • Autoprovisionierung: • Ausgewählte Einstellungen des Web-Konfigurators können schreibgeschützt werden • PBX / Provisioning Server kann Autoprovisionierung anstoßen. • Gigaset T300 PRO, T500 PRO PBX: Autoprovisionierung wird nach jeder Mobilteilanmeldung neu angestoßen • Web-Konfigurator: • Neuer „5-Minuten Installations-Assistent“ zur schnellen Durchführung der wichtigsten Installationsschritte • 3 neue Sprachen – Polnisch, Griechisch, Portugiesisch • Modus ‘automatisch’ oder ‘manuell’ für Firmware- und Profile-Update separat einstellbar • Möglichkeit des Neustarts der Basisstation Kompatibilität: --------------- • Unterstützung für zusätzliche Gigaset-Mobilteile: A510H und C300H • Gigaset T300 PRO / T500 PRO • Asterisk 1.6 • Broadsoft V.17. CTI wird unterstützt: Click to dial, Click to answer Anmerkungen: ------------ • Wenn ein A510H Mobilteil bereits an Ihrem Gigaset IP-Telefon registriert ist, dann melden Sie dieses Mobilteil nach dem SW-Update noch einmal an, um die volle Kompatibilität zu den neuen Features zu bekommen. • Die integrierte Online-Hilfe im Web-Konfigurator, die Sie bei der Installation unterstützt, ist zuerst nur in Englisch verfügbar und ab November 2011 in allen anderen unterstützten Sprachen.