------------------------------------------------------------ ENGLISH VERSION (Die deutsche Version finden Sie unten) ------------------------------------------------------------ Gigaset SL400H - Firmware update 04/2011 (version 78.045.02) ========================================================== How to update: ----------------- 1. Please start the software "Gigaset Quicksync" on your PC. You will find it on the internet at http://gigaset.com/hq/en/cms/PageQuickSync.html 2. Please carry out the update of the Gigaset Quick Sync software if it is offered. 3. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur). 4. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC. 5. Choose “Connect handset automatically” in the Gigaset Quicksync window. 6. When a connection is set up, the message “SL400H connected (n) (nnnnnnnnnn)” appears. If a new handset firmware is available, a prompt automatically appears. 7. The firmware will be installed on your handset in several cycles. Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”. Improvements and changes: --------------------------------- • Direct call By pressing any key the one number already stored is dialled. • Babyphone function with feedback: In addition to being able to hear the baby, it is now also possible to answer the baby. • Displaying CLIP type (redial list): An icon in front of the number/name in the CLIP display shows where a call was started: home, office, mobile. • Battery low tone in handset changed. • IP –feature support: Live ticker text can be enabled / disabled locally on handset Descriptions for Firmware update: ---------------------------------------- • Pictures and ringtones stored on the handset should also be stored on the PC; these are deleted during an emergency update! • When updating SW do not connect the handset via the USB hub; please connect handset directly to the PC. ------------------------------------------------------------ DEUTSCHE VERSION ------------------------------------------------------------ Gigaset SL400H - Firmware update 04/2011 (Version 78.045.02) ========================================================== So erfolgt der Update: -------------------------- 1. Starten sie die Software „Gigaset Quicksync“ auf ihrem PC. Sie finden diese auf der Internetseite: http://gigaset.com/de/de/cms/PageQuickSync.html 2. Wird ihnen eine Aktualisierung angeboten, führen sie diese durch. 3. Verbinden sie das Mobilteil durch ein Mini-USB Kabel direkt mit ihrem PC (nicht mit einem USB-HUB) 4. Akkus bleiben im Mobilteil eingelegt; schalten sie das Mobilteil ein. Gegebenenfalls wird automatisch die Gerätetreiber Software für ihr Mobilteil installiert. 5. Wählen sie im Fenster der Gigaset Quicksync Software „Mobilteil automatisch verbinden“. 6. Bei bestehender Verbindung wird der Hinweis eingeblendet „Verbunden SL400H (n) (nnnnnnnnnn)“. Steht eine neue Software zur Verfügung, erscheint automatisch die Aufforderung, dass die Firmware ihres Mobilteils aktualisiert werden kann. 7.Die Firmware wird in mehreren Zyklen auf ihrem Mobilteil installiert. Trennen sie das Mobilteil erst nachdem sie den Hinweis „Mobilteil Firmware wurde erfolgreich aktualisiert“ erhalten haben. Verbesserungen und Änderungen: ------------------------------------------ • Direktruf (Babyruf) Durch drücken einer beliebigen Taste, wird eine zuvor gespeicherte Rufnummer gewählt. • Babyphone mit Gegensprech-Funktion • Anzeige CLIP Typ: Ein Symbol vor der CLIP (Rufnummer/Name) in der Rufliste zeigt an, von welchem Anschluss der eingegangene Anruf getätigt wurde: Heim, Büro, Mobiltelefon • Akkuwarnton wurde geändert. • IP Leistungsmerkmale: Live Ticker kann am Mobilteil aktiviert/deaktiviert werden. Beschreibung SW-Update: -------------------------------- • Selbsterstellte Bilder und Klingeltöne sollten Sie generell auf Ihrem PC sichern. Bei einem emergency update werden diese gelöscht! • Bei einem SW-Update des Mobilteiles, dieses nicht über einen USB-HUB anschließen, sondern direkt am PC.